Dispose any foreign objects such as dust, sand, rocks and rubbish from the area to be cleaned. You may use a floor sweeper instead of a broom and dustpan for large areas.
Prepare the automatic scrubber dryer by pouring a cap of Upekkha HP Auto Scrub detergent into the clean water tank followed by clean water.
Assemble the floor squeegee at the back of the machine and your preferred agitator accessory such as a brush in the front.
Turn on the machine and start scrubbing the floor.
Empty the collection tank that is now full of dirty water via the drain hose.
While the collection tank is being drained, rinse it with clean water. Make sure no sediments are left behind in the tank.
Open the lids of the tank to let them dry thoroughly.
Remove the floor squeegee and rinse it with clean water.
Let the floor squeegee rest standing on a flat surface to dry.
For battery operated: Charge auto scrubber for 8 hours and disconnect right after. Do not overcharge the batteries. For mains operated: Disconnect the cable plug from the mains socket and carefully wind the cable.
